[IC]:SI4432
[Frequency]:425~525MHz
[Power]:20dBm
[Distance]:1.6km
[Interface]:SPI
[Introduction]:E27-4333M20S is a 100mW wireless transceiver module, operates at 433MHz,with small-size(1.27 Pin pitch).E27-4333M20S is based on the original imported RF chip Si4432 from Silicon Labs. With diversified built-in antenna and excellent anti-interface performance, the chip supports frequency hopping.
Pin No | Pin item | Pin direction | Pin application |
---|---|---|---|
1 | GND | - | Ground |
2 | GPIO0 | Input/Output | Configurable GPIO |
3 | GPIO1 | Input/Output | Configurable GPIO |
4 | GPIO2 | Input/Output | Configurable GPIO |
5 | VCC | Input/Output | Power supply 1.8V~3.6V. |
6 | SDO | Output | SPI master input slave output |
7 | SDI | Input | SPI master input slave output |
8 | SLCK | Input | SPI master input slave output |
9 | NSEL | Output | SPI chip select for starting SPI communication |
10 | IRQ | Output | SPI chip select for starting SPI communication |
11 | SDN | - | Shut down input PinIt is low level when working.(See SI4432 manual for moredetails) |
12 | GND | - | Ground |
13 | ANT | - | Antenna |
14 | GND | - | Ground |