[IC]:SX1278
[Frequency]:410~441MHz
[Power]:21~30dBm
[Distance]: 8.0km
[Interface]:UART
[Weight]:5.0±0.1g
[Introduction]:Based on originally imported RF IC SX1278 from SEMTECH, E32-433T30S is a SMD wireless module (UART) operates at 410-441MHz and features LoRa technology, data encryption & compression.
serial number | pin | Pin direction | Remark |
1 | GND | Input | Module ground |
2 | VCC | Input | Positive reference of module power supply, voltage range: 3.3~5.5V DC |
3 | AUX | output | Used to indicate the working status of the module; the user wakes up the external MCU, and the output is low during the initialization of the power-on self-test Level; (can be suspended) |
4 | TXD | output | TTL serial port output, connected to external RXD input pin; |
5 | RXD | enter | TTL serial port input, connected to the external TXD output pin; |
6 | M1 | Input (very weak pull-up) | Cooperate with M0 to determine the 4 working modes of the module (not floating, if not used, it can be grounded) |
7 | M0 | Input (very weak pull-up) | Cooperate with M1 to determine the 4 working modes of the module (not floating, if not used, it can be grounded) |
11 | ANT | output | Antenna interface (high frequency signal output, 50 ohm characteristic impedance) |
12 | GND | - | Fixedly |
13 | GND | - | Fixedly |
14 | GND | - | Fixedly |
18 | NC | - | Empty feet |
19 | NC | - | Empty feet |
20 | NC | - | Empty feet |
21 | NC | - | Empty feet |
22 | RESET | Input | Reset pin when the program is loaded (suspended, the user does not need to connect) |
23 | GND | Input | The ground pin when the program is loaded (dangling, the user does not need to connect) |
24 | NC | - | Empty feet |