E32-433T33S SX1278 433MHz 2W TTL wireless serial port module (UART) LoRa spread spectrum technology
[Chip solution]： SX1278
[Carrier frequency]：410~441MHz
[Transmit power]： 33dBm
[Communication distance]： 16km
[Product size]： 25*40.5mm
[Introduction]：E32-433T33S is a wireless serial port module (UART) based on SEMTECH's SX1278 RF chip. It has multiple transmission modes, working in the 410MHz~441MHz, (default 433MHz), LoRa spread spectrum technology.
| serial number | pin | Pin direction | Remark |
| 1 | GND | Input | Module ground |
| 2 | VCC | Input | Positive reference of module power supply, voltage range: 3.3～5.5V DC |
| 3 | AUX | output | Used
to indicate the working status of the module; the user wakes up the
external MCU, and the output is low during the initialization of the
power-on self-test Level; (can be suspended) |
| 4 | TXD | output | TTL serial port output, connected to external RXD input pin; |
| 5 | RXD | enter | TTL serial port input, connected to the external TXD output pin; |
| 6 | M1 | Input (very weak pull-up) | Cooperate with M0 to determine the 4 working modes of the module (not floating, if not used, it can be grounded) |
| 7 | M0 | Input (very weak pull-up) | Cooperate with M1 to determine the 4 working modes of the module (not floating, if not used, it can be grounded) |
| 11 | ANT | output | Antenna interface (high frequency signal output, 50 ohm characteristic impedance) |
| 12 | GND | - | Fixedly |
| 13 | GND | - | Fixedly |
| 14 | GND | - | Fixedly |
| 18 | NC | - | Empty feet |
| 19 | NC | - | Empty feet |
| 20 | NC | - | Empty feet |
| 21 | NC | - | Empty feet |
| 22 | RESET | Input | Reset pin when the program is loaded (suspended, the user does not need to connect) |
| 23 | GND | Input | The ground pin when the program is loaded (dangling, the user does not need to connect) |
| 24 | NC | - | Empty feet |