[IC]:SX1276
[Frequency]:862~930MHz
[Power]:30dBm
[Distance]:8km
[Size]:24*43mm
[Introduction]:E32-900T30D is a wireless serial port module (UART) based on SEMTECH’s SX1276 RF chip. It has multiple transmission modes, working in the 862MHz~931MHz, LoRa spread spectrum technology, TTL output.
Main parameter | Description | Remark |
Distance for reference | 8kM | Test condition:clear and open area, antenna gain: 5dBi,antenna height: 2.5m,air data rate: 2.4kbps |
TX length | 58Btye | Maximum capacity of single package, automatic sub-packing after exceeding. |
Buffer | 512Btye | - |
Modulation | LoRa™ | - |
Communication interface | TTL | @3.3V |
Package | DIP | - |
Connector | DIP | 1*7*2.54mm spacing |
Size | 24*43 mm | - |
Antenna | SMA-K | 50 ohm impedance |
Main parameter | Min | Typ. | Max. | nit | Remark |
Operating voltage | 3.3 | 5 | 5.5 | V | ≥5.5 V ensures output power |
Communication level | - | 3.3 | - | V | For 5V TTL, it may be at risk of burning down |
Operating temperature | -40 | - | +85 | ℃ | Industrial design |
Operating frequency( | 862 | - | 931 | MHz | Support ISM band |
Transmitting current | - | 650 | - | mA | Instant power consumption |
Receiving current | - | 25 | - | mA | - |
Turn-off current | - | 5 | - | μA | Software is shut down |
Max Tx power | - | 30 | - | dBm | - |
Receiving sensitivity | -145 | -147 | -148 | dBm | Air data rate is 2.4kbps |