[Supply voltage]:8V~28VDC
[Network protocol changer]:IP, TCP/UDP
[Network port specification]:standard RJ45
[Domain name resolution]:support
[IP acquisition method]:static IP, DHCP
[Introduction]:ECAN-E01 is a high-performance industrial-grade Ethernet and CAN-bus data conversion device developed by Ebyte. It integrates 2 CAN-bus interfaces, 1 EtherNet interface, supports TCP/UDP protocol, and can easily 。Complete the intercommunication between CAN-bus network and Ethernet network. ECAN-E01 has a built-in 120 ohm resistor, which can be enabled by dialing a code; it supports working in the temperature range of -40°C to 85°C. It has one 10M Ethernet interface, CAN interface with high protection and increased isolation; the maximum baud rate of 2 CAN ports communication is 1Mbps, with TCP Server, TCP Client, UDP and other working modes, and software configuration parameters can be configured through the host computer.
ialNumber | Identification name | Function Description |
---|---|---|
1 | ETHERNET | Ethernet interface, standard RJ45 interface, connected withequipment or PC |
2 | Reload | Reload button, long press for more than 5s to restore factory |
3 | V+ | Power supply positive interface, 5.08 phoenix head, (default8-28V), recommended 12V/24V |
4 | SYS | Power indicator (red), access to the network (yellow flashing) |
5 | CAN1/ERR | CAN1 data light (green), data error light (red) |
6 | CAN2/ERR | CAN2 data light (green), data error light (red) |
7 | CAN2_H | CAN2 channel bus high, 5.08 phoenix head |
8 | Dial RES | CAN1 channel 120 ohm resistance DIP switch |
9 | CAN1H CAN1 | channel bus high, 5.08 phoenix head |