ECAN-W01S DUAL-CHANNEL CAN TO WIFI PROTOCOL Conversion gateway AP/STA dual-mode two-way transparent transmission
[Power supply voltage]：8V~28VDC
[Network protocol]： IP, TCP/UDP, WiFi
[WiFi specification]： IEEE802.11a/b/g standard
[Network port specification]： standard RJ45
[Domain name resolution]：support
[IP acquisition method]：static IP, DHCP
[Introduction]：ECAN-W01S is a high-performance industrial WIFI and CAN bus data conversion equipment developed by EBYTE. It integrates two CAN bus interfaces, one EtherNet interface and one WiFi interface internally, which can easily complete the interworking of CAN bus network and WiFi network
| Serial No | Identification name | Function description |
| 1 | ANT | WiFi antenna SMA interface |
| 2 | ETHERNET | Ethernet interface, standard RJ45 interface, connected to PC |
| 3 | V+ | Power positive interface, 5.08 phoenix head, (default 8-28V), 12V/24V recommended |
| V- | Power supply cathode interface 5.08 Phoenix head | |
| 4 | Reload | Reload button, press and hold for more than 5s to restore the factor |
| 5 | CAN2_H | CAN2 channel bus high, 5.08 phoenix head |
| CAN2_G | CAN2 channel bus ground, 5.08 phoenix head | |
| CAN2_L | CAN2 channel bus low, 5.08 phoenix head | |
| 6 | Dial RES1 | CAN1 channel 120 ohm resistance dial switch |
| Dial RES2 | CAN2 channel 120 ohm resistance dial switch | |
| 7 | CANl_H | CAN1 channel bus high, 5.08 phoenix head |
| CAN1_G | CAN1 channel bus ground, 5.08 Phoenix head | |
| CAN1_L | CAN1 channel bus low, 5.08 phoenix head | |
| 8 | SYS | Power indicator (red), network access (red flashing) |
| 9 | CAN1/ERR | CAN1 data light (green), data error light (red) |
| 10 | CAN2/ERR | CAN2 data light (green), data error light (red) |