Home >Module>BLE>Other
E104-BT20 Ebyte 2.4GHz ISM GFSK BR EDR2.1 UART wireless bluetooth transceiver bluetooth module

[IC]:RTL8760ATT

[Frequency]:2402~2480MHz

[Protocol]:V2.1

[Distance]:50m

[Size]:25*13mm

[Weight]:1.2±0.1g

[Introduction]:E104-BT20 Bluetooth serial communication module is a data transmission module based on Bluetooth Specification V2.1 BR / EDR Bluetooth protocol.The working frequency is 2.4GHz ISM, and the modulation method is GFSK. The module's maximum transmission power is 3dBm.

Main ParametersValueRemarks
Min.Max
Input Voltage(V)03.6Permanent damage occurred when voltage is over 3.6V
Blocking Power(dBm)-10Low chance to be damaged for short-distance transceiving
Working Temp.(℃)0°C+85-

 

Main ParametersValueRemarks
Min.TypicalMax
Working Voltage(V)3.03.33.6Voltage above 3.3V can guaranty Max TX power
Tx Electrical Level(V)-3.3-5V TTL could cause permanent damage
Working Temp(℃)0℃-+70℃-
Working FrequencyChannel(MHz)2402-2480Support ISM Chanel
TX Current(mA)18.5-72.6-
RX Current(mA)18.7-69.1-
Max TX Power(dBm)-3--
RX Sensitivity(dBm)--89--
Arbitrary IO(VIL/VIH)-/1.75V-1.5V/--
Arbitrary IO(VOL/VOH)-/VCC-0.25-GNG+0.25/--
Connection Current(slave module)-20-mA


ParametersValueRemarks
Reference Range1500m@SUB-1GHzConditions: Clear Sky, Antenna Gain 5dBi, Antenna Height 2.5m, Air rate 1kbps
120m@2.4GConditions: Clear Sky, Antenna Gain 5dBi, Antenna Height 2.5m, Air rate 1Mbps
TCXO Frequency48MHz/32.768kHigh rate at 48MHz/Low Rate at 32.768k
ProtocolGFSK/
EncapsulationSMD/
Interface Type1.27mm Stamp Hole/
IC ModelCC1352P1F3RGZ/
FLASH352KB/
RAM80KB/
CoreArm ® Cortex ® -M4F/
Size32*20mm/
Antenna InterfacesIPEX/Stamp Hole@sub-1G,
PCB Antenna@2.4G
Equivalent Impedance is around 50Ω
Reference distance50mClear and open environment, antenna height 2.5m
Launch length300Byte-
Bluetooth protocolBluetooth Specification V2.1+EDR-
Communication InterfaceUART-
Packaging typeSMD-
Interface method1.27mm-
Dimensions13*25mm-
product weight1.2±0.1g-
Antenna interfacePCB AntennaEquivalent impedance about 50Ω