Home >Module>BLE>nRF528**
E104-BT5040U Ebyte nRF52840 BLE4.2 BLE5.0 2.4GHz wireless bluetooth Transceiver BLE USB Dongle module with PCB antenna

[IC]:nRF52840

[Frequency]:2360~2500MHz

[Protocol]:BLE 4.2 / BLE 5.0

[Distance]:250m

[Size]:59*18mm

[Introduction]:E104-BT5040UA is a small USB port Bluetooth wireless packet capture tool produced by Ebyte; it comes with a high-performance PCB on-board antenna and uses a Bluetooth Low Energy (BLE) SOC solution.

Parameter Performance Remark
Crystal frequency 32MHz/32.768kHz
support protocol BLE4.2/5.0
Power supply USB
Interface method USB
IC full name nRF52840-QIAAC0/aQFNTM 73
FLASH 1024kB
RAM 256kB
Kernel ARM@ Cortex ® -M4
Dimensions 59*18mm Plus shell with cap
Antenna form PCB Onboard antenna
Crystal frequency 32MHz/32.768kHz
support protocol BLE4.2/5.0
Power supply USB
Interface method USB
IC full name nRF52840-QIAAC0/aQFNTM 73
FLASH —1024kB
RAM 256kB
Kernel ARM@ Cortex ® -M4
Dimensions 59*18mm Plus shell with cap
Antenna form PCB Onboard antenna
Parameter Min. Typ. Max. Unit Remark
Operating voltage 4.35 5 5.5 V USB/VBUS power supply
Communication level 0 3.3 3.6 V
TX current(TX only run current (DCDC, 3V) PRF =+8 dBm) - 17.05 - mA
TX current(TX only run current (DCDC, 3V) PRF =+4 dBm) - 12.68 - mA
TX current(TX only run current (DCDC, 5V, REG0 out = 3.3 V)PRF= 0dBm) - 7.25 - mA
TX current(TX only run current (DCDC, 3V)PRF = 0dBm) - 7.63 - mA
TX current(TX current (3V) 1Mbps BLE measured from VBAT with PRF=9dBm) - 32 - mA
RX current(RX only run current (DCDC, 3V) 1Mbps / 1Mbps BLE) - 7.71 - mA
RX current(RX only run current (DCDC, 3V) 2Mbps / 2Mbps BLE) - 8.27 - mA
Operating temperature -40 - +85 Industrial design